How to Live a More Exciting Life With Network Marketing

If you are a network marketing professional then you have the ability to live an amazingly exciting life. In this article, we are going to talk about how to live a more exciting life with network marketing.

When you are working in network marketing you have the ability to be working from anywhere in the world now that we have the internet. There is no reason to be constrained to one area of the world. We can go anywhere in the world and still support our teams and show people how to be successful in our organizations.

If we don’t design it is not going to happen. If you do not know where you want to go, what you want to do and how you want to do it, it’s not going to happen. This is why we need to create dream lines. We need to know what we are going to fill our free time with once we create it. If we don’t know what we are going to do with the free time, we will find something to fill it.

The biggest trap is getting addicted to working for work’s sake. Instead of working for work’s safe we need to create systems that will work for us and fill our time with things we enjoy doing. What are some hobbies that you have? What are some causes you want to help with?

Network marketing allows us to live any lifestyle that we want to live and create passive, residual income but we have to tell life what we want. It is not enough just to have a dream board. You have to have a game plan.

Posted in homepage | Comments Off

Are Travel Agents Old School?

It appears you can’t stare at the TV for 60 minutes without seeing a notice with William Shatner discussing Travelocity or that senseless dwarf discussing Orbitz. These travel sites have been extremely effective at encouraging voyagers to book their own particular carrier and lodging reservations on the web. So with this colossal push from the web to assume control over the travel business, one needs to ask, “Are travel agents old school?”

In the event that you have searched for some of these travel web sites, you have watched that they are stunning in the assorted qualities of travel choices that they make accessible. As a business traveler, be that as it may, your requirements are fairly unique in relation to the run of the mill aircraft traveler.

There are some certain administrations and genuine help that a living and breathing travel agent can give that basically can’t be duplicated by a computerized site like Travelocity or Orbitz. Some of those administrations that a prepared business traveler would be unable to live without having…

A Travel Agent will give you…

- Focus. You as a business traveler are not orchestrating this excursion for excitement. You have particular business goals as a main priority. So on the off chance that you should remove time from planning for your business assignment to stress over travel agendas, lodging and rental auto reservations and so forth, that is time that you are not being beneficial for your business.

When you get the chance that you can call a skilled travel agent who knows your travel profile well and delegate those courses of action to that agent, they carry out their occupation in finding only the right facilities for you and you are liberated to do what you excel at, spotlight on your business and the up and coming business trip.

- Economy. It is hard to find that harmony between finding the housing that fit the requesting timetable of a businessman out and about and is conscious of the organizations travel spending plan too.

On the off chance that you utilize a computerized online travel administration, you may need to relinquish accommodation, timetable or area for economy.

A decent travel agent will endeavor to get you the right schedule while getting as close the corporate travel cost confinements as would be prudent. Furthermore, they will do it without taking up a considerable measure of your time.

- Back up. You needn’t bother with help if your excursion goes totally as arranged. Be that as it may, in the event that you experience issues out and about, you can wind up in need or rescheduling flights and finding new lodging to work around scratched off flights, climate issues or other surprising intrusions to your arrangements.

These travel debacles are not aware of your tight due dates to meet your business objectives. In any case, you have a travel agent who is committed to giving you administration, he or she can locate those option courses and assets to do whatever they can to get you to your destination so you can direct your business on time.

- That individual touch. You may have travel inclinations that you need to accomplish with every outing you take. A travel agent has your profile and your travel history so they can do what they can to suit your inclinations.

Yet, in addition, when you have particular unique needs, for example, an eating regimen constraint or a requirement for convenience because of an inability, it will be a travel agent that sees to it that your needs are accommodated and you are well dealt with out and about.

- No Complications. In the event that your travel agenda includes making associations with different business accomplices who are going from various workplaces, complex travel calendars and schedule challenges that just can’t be depicted to the nonexclusive screens of an online travel administration, you can disclose these inconveniences to your travel agent and they can work with other travel agents attempting to arrange the meeting and see to it that your agenda meets your prerequisites.

While the online travel administrations do give a profitable and moderate other option to the general voyaging open, it is anything but difficult to see their confinements on the off chance that you are attempting to book a trek that is dubious or in the event that you have particular needs that the screens don’t suspect.

That is the reason working with a human travel agent ensures that this travel proficient person will devote themselves to the assignment of ensuring your excursion attempts to your details and that you get to your destination prepared to lead in business and be fruitful in your accomplishing your objectives.

Posted in homepage, Uncategorized | Comments Off

3D Scanning – What You Need To Know

3D scanning is a process of capturing digital information of object shape using equipment that has light or laser to measure distance between the object and the scanner. The non-destructive and non-contact scanning technology uses lines of laser light capturing the exact shape and size of the object. The fine details of even the smallest objects are captured and the process comes in handy in so many industries and fields. Some the areas that 3D scans are commonly used include automotive, manufacturing, medical and aerospace.

3D laser scanners capture thousands of points per second, allowing quick inspection of parts. It is a process that is ideally suited for measuring and inspecting contoured surfaces and also complex geometries that require lots of data for accurate description and where traditional measurement methods are impractical.

What are the advantages?

3D scanning has become very popular among business people in different fields. You can now easily find 3D scanning services for all needs you might have especially as far as accuracy and high quality productions are concerned. The popularity of the process is as a result of the many advantages it has over other traditional options. Some of the advantages that come with the process include:

1. Quick capture of all physical measurements of any given physical object; with 3D scanning, the size of the object does not matter.

2. Saves time when designing. The high definition details of objects make it possible for designers get it right with the first trail, hence saving time, even with productions that would have otherwise proved to be complex and time consuming.

3. Ensures perfect fit of parts with the first try. 3D has literally taken the guess work of production processes, especially for those dealing with prototypes and creating parts. The detailed information collected from an object is accurate and hence it is very rare to have parts that have any functional defects.

4. It captures engineering optimization that is necessary in manufactured parts. The process offers more confident to manufacturers in terms of meeting standards and any set objectives in the manufacturing process of parts. Using the scans, it has become even possible for manufacturers and designed to compare between designed and built models conditions so manufactured parts are top quality.

How does it help the design process?

3D scans are largely used in the design process of various products. Model scanning proves beneficial in the design process because:

· It increases effectiveness when working with shapes and parts that are complex

· It provides updated versions of CAD models that are outdated

· It makes it possible to replace missing parts or older parts

· It helps product designing so that someone else’s part can be accommodated

Which areas can in be used in?

3D scanning is very effective and has become a popular option in various fields including:

· Historical artifacts

· Prototyping or reverse engineering

· Entertainment industry for games, TV and movie productions

· Medical and dental

· Inspection

· Marine

· Construction and architecture

A 3D scan can prove highly beneficial in different sectors. If you do not have what it takes to enjoy the accuracy of 3D scans, you can get help from service providers who offer all kinds of scanning services.

Posted in homepage | Comments Off

Have You Ever Heard of Parallel Marketing?

Have you ever heard of Parallel Marketing?

If you haven’t I’ll explain it to you in just a sec.

I love the technology of the day. No more hassling friends and family, no more 3 foot rule, no more inviting everyone you know over to your house so your sponsor can “show the plan”, no more winding up being a member of the NFL club. And no, sports fans, I’m not talking about the National Football League.

In this case I’m referring to the NFL club as for NO FRIENDS LEFT club.

Trust me, back in the day your friends didn’t even want to see you coming because they knew you were going to try and sell them on looking at your business. And before you knew it… no friends left.

Thank God for the Internet. Now, even the most introverted guy or gal has a shot at building a downline that could pay them the extra money to make a car payment or afford the vacation of their dreams.

And this brings me to the question I asked you earlier. Parallel Marketing?

Parallel Marketing is when you offer someone something of value that other networker’s need which, in turn, helps them build THEIR business. This brands you in their eyes as someone they can trust. Therefore developing a bond of friendship between you and them.

I believe the FREE resource I’ve found is perfect for Parallel Marketing and thus helping you build YOUR business.

And to think I found this resource by accident. One night I was speaking with a fellow networking friend who asked me as to whether or not I had ever heard of a site that was ideal for networking. I responded with no, never heard of it. Anyway, I took his advice and went over to the site and started reading some of the comments of its members. Then I noticed some of the members kept talking about this new site. I figured I had better check the site out too. Next thing I knew, I was signing up as a free member, then happily upgrading.

The resource below will help you increase enrollments into YOUR business. Plus there is actual training that’s afforded to you too! And right now, for a limited time you can sign up for free and receive a Lifetime membership.

Anyway… here’s the link to hear an industry veteran explain what could very well be the secret to your business exploding within the next few months.

Posted in homepage, Uncategorized | Comments Off

The Best Places For Destination Weddings

Wedding bells are ringing everywhere! If you’re someone who is planning to get married on the coming year then you need to read what we have to say before you make any further wedding plans. For all us, the day we get married is probably the most important day of our lives and we want to make sure it is arranged that way as well. To do that, you don’t necessarily have to throw a grand wedding at the most expensive place around. A simple and much cheaper alternative is to get married at one of the following locations which are known for their exotic beauty and their services all of which are at your beck and call for very economical prices. And before you move on, here’s a tip – if you’re planning a destination wedding make sure you book flight tickets well in advance!

1. Belize:
This place is on top of our list of wedding destinations and the reason for that is because it offers so much for so little. The place has some extremely beautiful destinations and rainforests as well as old Mayan ruins. Oh and let’s not forget that this place is also home to the second largest barrier reef in the world. The best thing about this place is that instead of being filled with expensive resorts like most of the other exotic travel locations, it has a lot of economical lodges and the sea food here is divine yet cheap too. So you can even host a wedding feast filled with exotic sea food but still save a lot in your pocket.

2. Jamaica:
The best thing about Jamaica is that it provides you with a choice of two very different and equally beautiful locations. You can choose to get married on the white sandy beaches or near the Rocky Mountains depending on what you like. Or maybe you could get married on the beach and throw the dinner or reception in the mountains to get the best of both worlds. And on top of that, the arrangements here are really cheap as compared to other travel destinations.

3. Vermont:
This small collection of beautiful landscapes and homey villages is probably the best travel destination to get married in. The scenic beauty here gives you the perfect backdrop to take your wedding vows and have a fun pre or post wedding shoot too. There are a lot of cozy and warm bed and baths here as well as halls where you can hold your wedding party. And the best part of this is that you can get all of this at very very economical prices.

Now that you know the best places to get married in, we suggest that you start planning for your perfect destination wedding and make sure you book flight tickets well before time so as to avoid any unnecessary delays and problems in your plans! All the best! Cheers to new beginnings!

Posted in homepage | Comments Off

Brainstorming To Start A Small Business – Questions To Answer

Hello readers and potential future entrepreneurs. I understand the feeling; desire to create, operate, and succeed. Throughout my professional career, I have learned that there are numerous steps that must be taken in order to organize opening and operating a small business. I have put together a few questions which aspiring entrepreneurs should, at the very least, consider reading over. There are many questions that may arise with opening a small business, and I will address a few of those questions briefly in the following list of questions one may ask while brainstorming.

What type of business do you want to open? There are various business endeavors an entrepreneur could involve themselves in. It all comes down to what knowledge one has, or is willing to obtain. Are you a restaurateur? Repairman? Plumber? Home health / assistance? Do you have experience managing or working at such establishments? Do you need formal education from an institution? Will you work as a sole proprietor, or a partner / member? Research limited liability corporations (LLCs) in addition to sole proprietorships and partnerships. S corporations are another option, but they are for business with stockholders, and may not be right for your particular business application.

What kinds of licensing and/or permits are required? Each business will have different licensing requirements; it all comes down to what the entrepreneur ultimately chooses to do. A restaurant would need food safety licensing in addition to basic business licensing, and if alcohol is on the menu – there is another permit the entrepreneur would need to legally sell alcohol on the premises. Repair oriented businesses would need at least the business license to repair, but if they sell parts as well, they would need to have “retail” listed on their business license in addition to “repair”. Health care services require at least formal education and licensing as an LPN, RN, or one of several other health care related licenses. Be sure to check your state’s laws to ensure what is necessary to operate your type of business.

What training / education / certifications are required to legally run this business? We touched upon this in licensing / permits, however there is much more involved than the required licensing. For example, one cannot operate a vehicle collision repair business without the knowledge of performing those types of repairs. There are schools that can be attended to learn what must be learned to effectively operate nearly any kind of business. However, there are also businesses where experience is enough to operate effectively without needing any formal education (lawn care, house cleaning just to name a couple). Also, there are certifications for training in nearly, if not all, care industries.

Does this business require a storefront? Retail establishments will undoubtedly need a storefront. Bear in mind, retail business will have a much larger initial investment than a service based operation. That initial investment is inventory. Some service businesses may not need a storefront to operate, as much of the service performed could very well be on-site. If a storefront is necessary, be sure to consider delivery or on-site service if it is feasible for your operation.

How much will it cost? This number will vary wildly based on the type and size of business you are planning. For smaller businesses, this number could be as low as $200 for a license and/or permit, or as high as a million dollars or more. Obviously, inventory is very expensive, and so are specialized tools for performing extremely precise work. Calculate the expected opening and operating expenses. Determine what size storefront is needed (if applicable), and research local commercial realty properties, locations, and prices. It is absolutely cheaper to rent in the short-term, although the thought of owning property that is paid off is very tempting. Prices on most things will vary based on your location. Employees are another cost, if your business warrants employees. When employees come into the equation as opposed to sole proprietors or partnerships, one must add extra insurance for the business (unemployment insurance comes to mind). Check with your selected insurance company for which types of additional coverage are required, and if offering health insurance can be done reasonably. Those employees will also need to have taxes paid on their wages – part from the employee’s paycheck and part from the company. Another potential cost is repayment of loans, if you don’t already have the capital needed to open your business. Basic operating expenses are not to be forgotten, as heating/cooling, Internet connectivity, and utilities will be regular expenditures for any storefront. On-site service operations cost very little when compared to a physical storefront.

How can an individual pay for this? If you do not have the funds available, which is very common, applying for loans is a way to attain funding. Be sure to have a business plan with projected expenses and revenues. There are other ways to gain funds for a business. Look into grants. While they are not very common, they are a potential source for assistance nonetheless. If many people believe in your dream, one could possibly acquire donations from those individuals.

What about accounting? Bookkeeping is a necessity – research which accounting/bookkeeping software would work best for the type of business you are planning. Point-of-sale (POS) systems are needed for “ringing up” and selling inventory or goods to the customer. POS systems keep track of sales, sales taxes, employee labor dollars spent, and many other items. If you are apt at creating spreadsheets, you may be able to keep track of your own inventory depending on your particular business model.

I hope this brief listing of questions and potential answers has been of assistance to aspiring entrepreneurs. Although there are countless successful entrepreneurs who have little or no formal education in business, it is never a bad idea to research courses regarding administration and management. Be sure to take a look at the Small Business Administration’s website at http://www.SBA.gov for more helpful information.

The author, Johnathan Baker, is an educated entrepreneur, with over ten years of experience in small business administration and management. Opening any type of business is no simple task, as many things must be considered. With experience opening, operating, and managing small businesses, the author aims to help aspiring entrepreneurs in realizing their dreams. While the questions are not all inclusive, they are, at the very least, a good bit of information to consider throughout the beginning processes of opening a small business. Take the information provided and begin or continue working on your business plan on the road to entrepreneurship.

Posted in homepage, Uncategorized | Comments Off

All You Need To Know About The PTFE Ring Gasket

Gaskets are one of the basic elements for preventing the leakage, mist formation, and spray outs after the flange guards. They are installed at the flange joints, pipelines or valve joints, etc. to prevent the leakage of the harmful gasses and liquids from the gap between the joints. The gaskets are proven to seal the gap between the surfaces of the joints and provide better protection at an affordable price. They bear the high pressure of the high-temperature chemicals and have corrosion resistance properties. They are used in many industries like automotive, aerospace, chemical industries, electronics, military industries, pharmaceuticals and appliances.

The Types Of The Loads That A PTFE Ring Gasket Bear Are As Follows:-

The initial compressive load is the bolt load which pulls the gasket material into surface defects to form a strong seal.
The hydrostatic end force which tends to separate the surfaces of the flange joints when the arrangement is over pressurized.
The internal load pulling the part of the gasket exposed to inner force. It tends to blow the seal out of the joint.
The various metals and materials are used to make gaskets which can meet the demand of various industries. The range covers non-metallic, semi-metallic and metallic gaskets. The industries mostly install PTFE ring gaskets which are made up of a material and provide better performance in the operation.

This type of the gaskets used widely in the chemical industries and pharmaceuticals because it avails numerous benefits, besides acting as the protective seal for the leakage. It reduces friction to provide a rigid usability and avoid any of the damage or failures.

There Are Many Factors That Are Affecting The Performance Of The Gaskets:-

The Flange Load – The pressure on the two surfaces of flange joints churns the product and compresses the gasket to create an even tighter seal. The gaskets are enough tough to bear this load and the bolts of the joints should be tightened enough to create a perfect seal.

Temperature – The high temperature sometimes affects the efficiency of the product, but the gaskets are made of the high-grade material which is actually temperature resistant.

Fluid – The chemicals flowing through the pipelines is highly corrosive in nature and the liquids are harder to sell in comparison to the gas. The PTFE ring gaskets seal the liquid and prevent it from flowing outside. The product also prevents the contamination of the liquid.

Posted in homepage | Comments Off

Your 50 – Part 2 – The Keys to Starting Your Own Business Now!

In part 1 of this article series we met 3 individuals with unique backgrounds that left corporate and forged their own way. Here we illustrate 2 addition stories along with important strategies and tactics you need s you go forward in your own business. This journey of starting your own business is not for the faint of heart, but the success you will find will be life-changing.

Here is what you will learn:
1. Franchising is a good option for a business.
2. Doing your own business is very rewarding.
3. How coaching is vital to making your business a success.

First Entrepreneur

Our first entrepreneur, was a successful high-level executive first at Ford and then at Terex, a firm focused on lifting and material processing products (e.g. cranes), with all the associated perks and incentives. Meet Pete Gilfillan. He had the good life and no reason to change until one day…

Alan: I saw that your main business is helping people evaluate franchises (FranChoice). How did you get started in your own business? What triggered that decision?

Pete: I was a corporate executive, first with Ford and later with Terex and they literally owned my life. I was traveling all the time. I just decided one day I had had enough and I would be an entrepreneur.

Alan: Tell me more about what happened when you decided to leave corporate life.

Pete: In my last position, I was with Terex. I live in Chicago, but the Terex is headquartered in Connecticut and I was on the road 6 days a week and much of the travel was international. With all the travel I didn’t eat right, didn’t exercise and frankly I was miserable. I was in another country and I woke up in the middle of the night and I couldn’t remember what country I was in. I realized then I had had enough. When I got back to Chicago, I told my wife about the decision. At first my wife wasn’t keen on the idea of my leaving corporate. She saw the practical side of staying in corporate (financial security), but I knew I needed to make a change. I quit my job and I started working with a franchise consultant in order to find a franchise. After a few months we found Junk King and saw that it was be a good fit. I liked that it was a service based business and could be scaled up; such as adding trucks as the business grew and it had little overhead. Later, I started to work with FranChoice, where today I’m one of the top franchise consultants. I really like the way their business model works. There is no cost to individuals (companies pay FranChoice) and it gives me the opportunity to do what I love most, which is to help people find the business that meets their needs.

Alan: That’s great. You are able to do what you love. Let’s change gears for a minute. I saw that you wrote a best-selling book. Writing a book is a big step. How did you come up with the idea for your book?

Writing is a key way to demonstrate your expertise and build your business

Pete: Darren Hardy, who is pretty well known in the entrepreneur circles, is my mentor. I went to his High Performance Summit and Darren said one of the best ways to give back is through writing a book. Since I have a lot of knowledge about the franchise business, doing a book on it was a good fit.

Alan: How did you find the time to write?

Pete: There is many ways to write a book. I found a company that would write the actual words while I talked. I would put together an outline for each chapter and talk for a couple of hours with the writers. We would meet for 2 hours a week, either early morning or late at night. After a draft of the book was created, I had someone edit the book. Even then it took a year and a half to complete the book.

Alan: How did you go about publishing it?

Pete: I was able to find a publishing company through my business coach.

Alan: It had to be daunting to start your own business after being in corporate. What is one thing you wish you knew before you started your own business?

Pete: If I could have been able to keep my corporate job and invested in franchise and then make the leap instead of going in cold to my own business, it would have saved me a lot of angst. I may have done something different than Junk King. I could have started a franchise on a part-time basis, say 15 hours week. With Junk King there was no way to do it on a part-time basis.

Alan: What’s next for you?

Pete: Speaking engagements, so I can reach more people and continue to work with ExecuNet, which is a private community made up of over 750,000 CEOs, VPs and various leaders and influencers.

Alan: Any final words?

Pete: I would say that for franchising, people need to have an open mind. When people ask me about franchising, they have already made up their mind that it would be food (McDonalds, etc.) They have that in mind because they see a lot of people eating at those restaurants so they assume it is a good business to get into. I help them understand that the food business is very competitive; has high capital investment and a high cost of goods sold (the food). There are over 3000 franchises in every conceivable business that may fit their needs. It doesn’t have to be food.
But regardless of what business you go in, whether it is a franchise or not, you need to work hard. There is no substitute for hard work.

Alan: Good words to live by. Thanks for your time.

Second Entrepreneur

Our second entrepreneur was a successful telecom executive before going into his own business. He shares key ideas on making your business grow. Meet Rick Lochner.

Alan: How did you come to be an entrepreneur?

Rick: I’ve known for some time that I wanted to be in my own business and that it would be in the leadership area. I worked with entrepreneurial company and it was sold 2 years after I started. I went to another company and 2 years later it was sold. The turmoil of being at companies that are going through turnarounds is very difficult for everyone involved. It is very long hours, great stress and often the rewards of that hard work just aren’t there. I’ve been laid off 4 times in my career so I knew corporate has no security. I even negotiated my severance package before I went to work a healthcare company.

Alan: How exactly did going into your own business occur?

Rick: My wife and I were having brunch with a couple and we talked about how it would be great to start business and details on what that business would look like when it started in a few years. At the end of the meal, I said, “Why are we waiting; let’s do it!” It was one of the best decisions I’ve ever made.

Alan: What do you like best about being an entrepreneur?

Rick: The best thing is I get to do what I love. In corporate, there were many things I had to do that I really didn’t enjoy. Being an entrepreneur, being in my own business, enables me to live with purpose and that is very meaningful to me.

Alan: Is there anything you would do differently now if you were just starting your business?

Rick: I would have pursued the non-profit market right away. I didn’t because people told me there is no money in that business, but that is not true. That market needs to be approached differently than for-profit but they need my services just as much. Now non-profit is 25% of my business. But you asked if I would have done anything differently and the answer is no. The business strategy worked and I would have approached starting the business the same way.

Alan: What challenges did you have starting out?

Rick: I started the business in July 2008. The US was already in a recession and financial markets were in turmoil and little did I know things in the business world were about to get a lot worse. I had worked in telecom for many years as an executive and I had been quite successful. I had a load of contacts at my previous company, Sprint; there were many people that knew me well and respected me but I was not able to get business from them. They still saw me as a telecom executive and not as knowledgeable in leadership development, even though I had been developing leaders at Sprint. I had traveled a lot during me years in corporate and my connections in Chicago were no better than in Atlanta or any other U.S. city. I knew I needed to develop roots in the local community. I joined Naperville Area Chamber of Commerce and started to created circles of influence. In time the contacts I made developed into connections for the business. It wasn’t easy, but I went all in; 100% to make the business work.

Why having a part-time business is so important

Alan: What advice would you give to someone that is climbing the corporate ladder?

Rick: Every corporate employee should have a part time gig to provide a bridge to go into business for themselves or just to have a secondary income source. I started teaching leadership at Keller School of Business in 2004. Teaching helped in the 8 months transition to my business full-time. It provided income after getting laid-off; making it easier to focus on the growth of the business and not where the next paycheck was coming from.

Alan: What has been the biggest challenge in your learning curve as an entrepreneur?

Rick: Marketing was new to me; I had not worked in that area. So I put together my business plan and my marketing plan and discussed it in detail with my two mastermind groups. They both said the business plan was great and was going to work but the marketing plan was not good. So I was tutored in marketing from people that were 20 years younger than me and their advice was spot on. This taught me a couple of valuable things. 1) You have to know what you are good at and what you are not good at and find experts in the areas that you are not good. 2) Spend a lot of time with people 20s to early 40s in order to gain insights on trends.

Alan: What additional advice would you give to someone that was looking to start their own business?

Rick: Know what problem you are trying to solve and position yourself so that is clear that you are the only one that can solve it. Too many people get hung up on their product or service and less focused on the problem to be solved. If you are going to go for it, then you really have to go for it. At the core, you have to know how to solve the problem in a unique way.

Alan: How did your writing a book come about?

Rick: The business model I developed has been a work in progress since 1999. I used that model to align the business at every organization I led as an executive. Often we try to fix a problem in an isolated way which doesn’t work. The process may not be broken; it may be the people, so you need a holistic approach. I wrote the first book in 2012 to complete my initial business strategy and a book does that. I was advised by a couple of authors and self-published it. I needed to promote the business alignment method and the book helps clarify the model as well as promote the business. I asked clients what is perfect length for a book and they said a Chicago to Los Angeles flight, which is about 4 ½ hours.

Alan: You’ve actually published multiple books. How did you come with your ideas?

Rick: The second book was to help the individual leader and the third book was for the entrepreneurs. I write books that apply to the business areas I work in.

Alan: How do you find the time to write?

Rick: The secret to success is having a coach. I’ve had 3 accountability coaches so far and each one helped me in a different way. When I first started the business, I needed an accountability coach; someone that would keep me accountable and keep me encouraged. She was the type of person I needed at that time. Keep in mind, I was starting this business during the depths of the Great Recession and needed that support. The second coach helped me write the books, not from the standpoint that he had ideas for the book, but he was able to get me moving along on the development of the book. I actually wrote the first book while my wife was driving during vacation because I was on a self-imposed deadline and needed to get it done. The third coach has helped me grow the business and take it took another level. If I would have had her in the beginning, it would not have worked well. Now that the business is growing and I am at a different place in my thinking and my business, she is exactly what I need.

Alan: Any final thoughts?

Rick: I talked with 20 different coaches before starting out in leadership coaching and based on my research, billions of dollars is wasted on leadership that doesn’t work. I am on a crusade to change that one leader at a time. It will take time to undo the wrong things that leaders are doing today; takes time to unlearn. But I will continue to work with them, one leader at a time. It is my passion.

Posted in homepage | Comments Off

The “How” And “Why” Of Electric Panels

Electric panel very simply refers to the electric board which provides electricity to the sub circuits. These panels are extensively used in Process industries, Automotive industries, Food and Beverage sector, Oil and Gas Equipment, Aerospace, Metal Forming Machinery, Machine Tools, Power Generation, R&D Testing labs and Process Industries and other industrial sectors.

Are You Banking On The Right Product?

Once you go through this post, you will actually understand why electric panels play such an important role in the aforementioned sectors. Think about the times when you experience power outage owing to a natural disaster— then you must have run to the electric panel to restore power. When it comes to electric panels, getting the right circuit breaker can make all the difference between safety and risk. These panels are generally based in backrooms, basements and less visited areas of a particular place.

The products of reputed manufacturers are known for the following aspects:

- Quality performance

- Easy installation

- Flawless design

- Power efficiency

- Low maintenance

Make sure you are checking the credentials of the manufacturer thoroughly before you are roping the same in. If you’re looking forward to install these units, you should find out about the manufacturers who are known for offering products with the aforementioned qualities.

The internet will offer you information about a lot of manufacturers providing these panels. However, one should realize that that not all of them are equally credentialed to offer you quality panels. It takes years of experience and domain expertise to manufacture panels that go on to serve you satisfactorily in the long term.

So, it is important to ensure that you’re actually taking the trouble to conduct proper market survey and then going on to settle for their product. Now, the question is – how exactly would you know that you are actually posing your faith in the right name? You can consider the following steps.

How To Settle For The Right Electric Panel

The first thing to do would be to seek recommendations from peers. Now, let us clarify from the very beginning that in order to meet the diverse quality requirements, leading manufacturers employ quality analysts who ensure that the products pass multiple quality stages before reaching you. Those who have accessed products of these manufacturers are bound to endorse their products- while those who have actually gone on to choose manufacturers arbitrarily might not as well be in a position to do so. When you are not conducting research on the background of the manufacturer, you are not even aware of whether or not the particular name is actually taking the aforementioned steps to ensure that only quality products are reaching you. Without research there is every chance of unwittingly ending up with poor quality products.

Read reviews in order to find out how the companies have been rated. Kindly ensure that you’re not leaving any stone unturned to get the best value for your money. Taking the aforementioned steps will ensure that you are not repenting your choice later on.

Posted in homepage | Comments Off

Useful Travel Tips About Seasons And Weather in Langkawi

Langkawi has the same type of climate as Thailand. It is known as a tropical monsoon climate. It can sometimes also be labeled as a “tropical wet climate” although that’s not always the case year round. It’s paradise climate makes Langkawi a great place to visit, but it’s wise to learn about the different types of weather before booking that perfect vacation.

For those that are accustomed to the usual four seasons of spring, summer, autumn and winter, Thailand may seem like a different planet! Its summers and winters may seem backward although It is usually warm all year round with temperatures ranging from an average of 27 degrees Celsius (81°F) during the coldest month of July to about 29 (81°F) during the hottest month of February.

With that said, rather than traditional seasons, Langkawi experiences only a wet season and a dry season. In terms of traveling, these are known as the low season and the high season respectively. This is because many tourists only prefer to visit during the dry season as to avoid the rain and possible monsoons.

Dry Season (high season):

November through March is the busiest time. During this time, Langkawi experiences the most traffic.

Following the heavy rains of the wet season, the plant life thrives creating beautiful sights.

Due to the high influx of visitors, many of the prices are raised to compete with demand.

Wet Season (low season):

July to October is when the Langkawi tourism business slows

The rain varies in levels of intensity. Sometimes intense flooding is possible.

On many occasions, the rain doesn’t last long but is very strong

During this time, boat travel is not always available

For those looking to hire a Koh Lipe ferry to Langkawi, it may still be possible to do during the wet season as long as the travel plans are made to be flexible. However, traveling by ferry from Langkawi to Phuket or even hiring a Langkawi to Krabi ferry is not recommended during the wet season.

During the dry season, it’s extremely common to find a ferry between these popular travel destinations. In fact, it is the preferred way to travel as many places in and around Thailand are too small to have their own airport.

In either season, wet or dry, it is usually possible to hire a ferry to KohLipe to Langkawi and vice versa without any problem. They offer very competitive pricing and have experience in transporting tourists and locals alike from island to island. There are also speed boats available as well for those looking for a faster ride.

It is important to choose the time of year carefully to get the best experience in Langkawi. Of course it all depends on of the preferences of each and every traveler, but usually, a vacationer wouldn’t want to spend their getaway avoiding a flood! On the other hand, some may be adventurous and find exactly what they’re looking for no matter the weather!

Posted in homepage | Comments Off